Digital Optical Monitor - Quanta Computer QuantaMesh User Manual

UANTA COMPUTER INC.

5.1.13 Digital Optical Monitor

5.1.13.1 show transceiver
This command displays Digital Optical Monitor information for the switch.
Syntax
show transceiver {interface [<slot/port>] [detail]}
Default Setting
None
Command Mode
Privileged Exec
Display Message
DOM Admin Mode: This displays the administrative mode of Digital Optical Monitor (DOM) for the
system.
Polling Interval: Polling interval. The range of value is 300 to 1800.
Interface: Valid slot number and a valid port number.
Temperature: Internally measured module temperature from transceiver.
Voltage: Internally measured module supply voltage from transceiver.
Tx bias current: Internally measured module tx bias from transceiver.
Tx Power: Internally measured module tx power from transceiver.
Rx Power: Internally measured module rx power from transceiver.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 48