Quanta Computer QuantaMesh User Manual page 376

UANTA COMPUTER INC.
5.9.4.8 radius server retransmit
This command sets the maximum number of times a request packet is re-transmitted when no response
is received from the RADIUS server. The retries value is an integer in the range of 1 to 15.
Syntax
radius server retransmit <retries>
no radius server retransmit
<retries> - the maximum number of retransmit times (Range: 1 - 15).
no - This command sets the maximum number of times a request packet is re-transmitted, when no
response is received from the RADIUS server, to the default value, that is, 4.
Default Setting
4
Command Mode
Global Config
5.9.4.9 radius server timeout
This command sets the timeout value (in seconds) after which a request must be retransmitted to the
RADIUS server if no response is received. The timeout value is an integer in the range of 1 to 30.
Syntax
radius server timeout <seconds>
no radius server timeout
<seconds> - the maximum timeout (Range: 1 - 30).
no - This command sets the timeout value (in seconds) after which a request must be retransmitted
to the RADIUS server if no response is received, to the default value, that is, 5.
Default Setting
5
Command Mode
Global Config
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 376