Quanta Computer QuantaMesh User Manual page 189

UANTA COMPUTER INC.
5.2.13.3 monitor session mode
This command configures the mode parameter to enabled the administrative mode of the session. If
enabled, the probe port monitors all the traffic received and transmitted on the physical monitored port.
Syntax
monitor session <session-id> mode
no monitor session <session-id> mode
<session-id> - Session ID.
no - This command disables port-monitoring function for a monitor session.
Default Setting
None
Command Mode
Global Config
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 189