Quanta Computer QuantaMesh User Manual page 723

UANTA COMPUTER INC.
6.3.2.56 log-adjacency-changes
log-adjacency-changes command logs OSPFv2 neighbor state changes. no log-adjacency-changes
command disables logging OSPFv2 neighbor state changes.
Syntax
log-adjacency-changes [detail]
detail—Sends a syslog message for each state change, not just when a neighbor goes up or down.
Default Setting
Disable
Command Mode
Router OSPF Config Mode
Layer 2/3/4 Managed Switch
QuantaMesh | Routing Commands 723