Quanta Computer QuantaMesh User Manual page 868

UANTA COMPUTER INC.
7.5.2.8 ip pim
This command administratively enables PIM on an interface or range of interfaces.
Syntax
ip pim
no ip pim
no - This command sets the administrative mode of PIM on an interface to disabled.
Default Setting
Disabled
Command Mode
Interface Config
7.5.2.9 ip pim bsr-border
Use this command to prevent bootstrap router (BSR) messages from being sent or received through an
interface or range of interfaces.
Syntax
ip pim bsr-border
no ip pim bsr-border
no - Use this command to disable the interface from being the BSR border.
Default Setting
Disabled
Command Mode
Interface Config
This command takes effect only when PIM-SM is configured as the PIM mode
i
Layer 2/3/4 Managed Switch
QuantaMesh | IP Multicast Commands 868