Quanta Computer QuantaMesh User Manual page 181

UANTA COMPUTER INC.
5.2.11.5 storm control action
This command configure what actions will be performed while the storm control is detected. The actions
include shutdown the interfae and send a SNMP trap if the storm occurs.
Syntax
storm-control action {shutdown | trap}
no storm-control {shutdown | trap}
shutdown – To shutdown the interface if the storm occurs.
trap – To send SNMP trap if the storm occurs.
no - This command disables unicast storm recovery mode on all interfaces.
Default Setting
None
Command Mode
Interface Config
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 181