Quanta Computer QuantaMesh User Manual page 212

UANTA COMPUTER INC.
5.3.3.12 telnet exec-timeout
This command sets the outbound telnet session timeout value in minute.
Changing the timeout value for active sessions does not become effective until the session
i
is reaccessed. Any keystroke will also activate the new timeout duration.
Syntax
telnet exec-timeout <1-160>
no telnet exec-timeout
<1-160> - max connect time (Range: 1 -160).
no - This command sets the remote connection session timeout value, in minutes, to the default.
Default Setting
5
Command Mode
Global Config
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 212