Quanta Computer QuantaMesh User Manual page 315

UANTA COMPUTER INC.
This command is used to configure how frequently non-urgent email messages are sent. Non-urgent
messages are collected and sent in a batch email at the specified interval. The valid range is every 3- to
1440 minutes.
Syntax
logging email logtime <interval>
no logging email logtime
<interval> - Specify how frequently non-urgent email messages are sent. The valid interval is 30 to
1440 minutes.
no - This command resets the non-urgent log time to the default value.
Default Setting
30 minutes
Command Mode
Global Config
This command is used to configure the email address to which messages are sent. The message types
supported are urgent, non-urgent, and both. For each supported severity level, multiple email addresses
can be configured.
Syntax
logging email message-type {both | urgent | non-urgent} to-addr <to-addr>
no logging email message-type {both | urgent | non-urgent} to-addr <to-addr>
<to-addr> - Specify a standard email address, for example admin@yourcompany.com.
no - This command removes the configured to-addr field of email.
Default Setting
None
Command Mode
Global Config
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 315