Ssh Client Session Commands - Quanta Computer QuantaMesh User Manual

UANTA COMPUTER INC.

5.3.4 SSH Client Session Commands

5.3.4.1 ssh
This command establishes a new outbound ssh connection to a remote host.
Syntax
ssh <ip-address|hostname> <username> { [port <port-id>] [protocol <protocollevel>] | [protocol
<protocollevel>] [port <port-id>]}
<ip-address|hostname> - A hostname or a valid IP address.
<username> - user account.
<port-id> - A valid decimal integer in the range of 1 to 65535, where the default value is 22.
<protocollevel> - SSH Protocol Level (Version) 1 or 2.
Default Setting
None
Command Mode
Privileged Exec
Display Message
Connected to 192.168.2.200, use ~. to terminate connection.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 214