Quanta Computer QuantaMesh User Manual page 614

UANTA COMPUTER INC.
5.25.1.2 show iscsi sessions
This command displays the iSCSI sessions.
Syntax
show iscsi sessions [detailed]
Default Setting
None
Command Mode
Privileged EXEC
Display Message
Example #1: show iscsi sessions
Session 0:
-----------------------------------------------------------------------------
Target: iqn.2006-03.com.kernsafe:q97041406.ImageDisk0
Initiator: iqn.2003-06.com.starwindsoftware.starport:ap111111
ISID: 801234567890
Example #2: show iscsi sessions detailed
Session 0:
-----------------------------------------------------------------------------
Target: iqn.2006-03.com.kernsafe:q97041406.ImageDisk0
Initiator: iqn.2003-06.com.starwindsoftware.starport:ap111111
Up Time: 00:00:11:00 (DD:HH:MM:SS)
Time for aging out: 598 secs
ISID: 801234567890
Initiator Initiator Target
IP Address
---------------
172.16.2.147
172.16.2.147
TCP Port IP Address
-------- ---------------
1090 172.16.2.151
1092 172.16.2.151
Layer 2/3/4 Managed Switch
Target
TCP Port
--------
3260
3260
QuantaMesh | Switching Commands 614