Quanta Computer QuantaMesh User Manual page 743

UANTA COMPUTER INC.
6.6.2.12 ip rip receive version
This command configures the interface to allow RIP control packets of the specified version(s) to be
received.
The value for <mode> is one of: rip1 to receive only RIP version 1 formatted packets, rip2 for RIP
version 2, both to receive packets from either format, or none to not allow any RIP control packets to be
received
Syntax
ip rip receive version {rip1 | rip2 | both | none}
no ip rip receive version
no - This command configures the interface to allow RIP control packets of the default version(s) to
be received.
Default Setting
Both
Command Mode
Interface Config
Layer 2/3/4 Managed Switch
QuantaMesh | Routing Commands 743