Quanta Computer QuantaMesh User Manual page 832

UANTA COMPUTER INC.
7.2.1.4 show ip igmp interface membership
This command displays the list of interfaces that have registered in the multicast group.
Syntax
show ip igmp interface membership <multiipaddr> [detail]
< multiipaddr > - A multicast IP address..
[detail] - Display details of subscribed multicast groups.
Default Setting
None
Command Mode
Privileged Exec
User EXEC
Display Message
Iinterface: Valid slot and port number separated by forward slashes.
Interface IP: This displays the IP address of the interface participating in the multicast group.
State: This displays whether the interface has IGMP in Querier mode or Non-Querier mode.
Group Compatibility Mode: The group compatibility mode (v1, v2 or v3) for the specified group on
this interface.
Source Filter Mode: The source filter mode (Include/Exclude) for the specified group on this
interface. This is "-----" for IGMPv1 and IGMPv2 Membership Reports.
If detail is specified, the following fields are displayed:
Interface: Valid slot and port number separated by forward slashes.
Group Compatibility Mode: The group compatibility mode (v1, v2 or v3) for the specified group on
this interface.
Source Filter Mode: The source filter mode (Include/Exclude) for the specified group on this
interface. This is "-----" for IGMPv1 and IGMPv2 Membership Reports.
Source Hosts: This displays the list of unicast source IP Addresses in the group record of the
IGMPv3 Membership Report with the specified multicast group IP Address. This is "-----" for IGMPv1
and IGMPv2 Membership Reports.
Expiry Time: This displays the amount of time remaining to remove this entry before it is aged out.
This is "- ----" for IGMPv1 and IGMPv2 Membership Reports.
Layer 2/3/4 Managed Switch
QuantaMesh | IP Multicast Commands 832