Quanta Computer QuantaMesh User Manual page 788

UANTA COMPUTER INC.
6.11.1.7 show ip bgp neighbors
This command displays information about Border Gateway Protocol (BGP) and TCP connections to
neighbors.
Syntax
show ip bgp neighbors [<ip-address> [advertised-routes | policy | received-routes | rejected-routes |
routes] | policy]
ip-address - Displays information about the IPv4 neighbor. If this argument is omitted, information
about all neighbors is displayed.
policy - Display inbound and outbound policies for all neighbors or the specified neighbor.
advertised-routes - Display routes advertised to a neighbor.
received-routes - Display routes received from a neighbor.
rejected-routes - Display routes rejected by inbound policy.
routes - Display routes accepted by inbound policy.
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Messages
Remote Address: The IP Address of the Peer's BGP interface.
Remote AS: Autonomous system number of the neighbor.
Peer ID: Router ID of the neighbor.
Peer Admin Status: States whether BGP is enabled or disabled of the neighbor.
Peer State: Finite state machine (FSM) stage of session negotiation.
Local Port: The port number of the local port.
Remote Port: The port number of the remote port.
Connection Retry Interval: Time interval, in seconds, at which the device resend messages to this
neighbor.
Neighbor Capabilities: BGP capabilities advertised and received from this neighbor.
IPv4 Unicast Support: Support IPv4 unicast packets or not. The valid value will be Both, Sent,
Received or None.
IPv6 Unicast Support: Support IPv6 unicast packets or not. The valid value will be Both, Sent,
Received or None..
Template Name: Name of a locally configured peer policy template.
Update Source: Allowed interface for TCP connections to the neighbor.
Layer 2/3/4 Managed Switch
QuantaMesh | Routing Commands 788