Quanta Computer QuantaMesh User Manual page 373

UANTA COMPUTER INC.
5.9.4.3 radius server attribute 4
This command to set the NAS-IP address for the radius server.
Syntax
radius server attribute 4 [<ipaddr>]
no radius server attribute 4
no – use this command to reset the NAS-IP address for the radius server.
Default Setting
None
Command Mode
Global Config
5.9.4.4 radius server attribute 95
This command to set the NAS-IPv6 address for the radius server.
Syntax
radius server attribute 95 [ipv6 address]
no radius server attribute 95
no – use this command to reset the NAS-IPv6 address for the radius server.
Default Setting
None
Command Mode
Global Config
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 373