General Commands - Quanta Computer QuantaMesh User Manual

UANTA COMPUTER INC.

5.20.1 General Commands

The following characteristics are configurable for the platform as a whole.
5.20.1.1 diffserv
This command sets the DiffServ operational mode to active. While disabled, the DiffServ configuration is
retained and can be changed, but it is not activated. When enabled, Diffserv services are activated.
Syntax
diffserv
Command Mode
Global Config
5.20.1.2 no diffserv
This command sets the DiffServ operational mode to inactive. While disabled, the DiffServ configuration
is retained and can be changed, but it is not activated. When enabled, Diffserv services are activated.
Syntax
no diffserv
Command Mode
Global Config
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 534