Quanta Computer QuantaMesh User Manual page 70

UANTA COMPUTER INC.
5.2.1.12 description
This command is used to create an alpha-numeric description of the port.
Syntax
description <description>
no description
no - This command removes the description of the port.
Default Setting
None
Command Mode
Interface Config
5.2.1.13 mdi
This command is used to configure the physical port MDI/MDIX state.
Syntax
mdi {auto|across|normal}
no mdi
auto - This type is auto selecting cable type.
across - This type is only allowed the Across-over cable.
normal - This type is only allowed the Normal cable.
no - This command restore the port mode to Auto.
Default Setting
Auto
Command Mode
Interface Config
This command is not provided for the 10-Giga SFP+ interface and 40G QSFP interface.
i
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 70