Quanta Computer QuantaMesh User Manual page 872

UANTA COMPUTER INC.
7.6.1.2 show ipv6 pim ssm
Use this command to displays the configured source specific IPv6 multicast addresses. If no SSM Group
range is configured, this command output is No SSM address range is configured.
Syntax
show ipv6 pim ssm
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Message
Group Address: The IPv6 multicast address of the SSM group.
Prefix Length: The network prefix length.
Layer 2/3/4 Managed Switch
QuantaMesh | IP Multicast Commands 872