Quanta Computer QuantaMesh User Manual page 442

UANTA COMPUTER INC.
5.12.2.14 lldp med faststartrepeatcount
The user can go to the CLI Global Configuration Mode to set the fast start repeat count, use the lldp
med faststartrepeatcount Global configuration command. Use the no lldp med faststartrepeatcount
to return the default value 3.
Syntax
lldp med faststartrepeatcount <1-10>
no lldp med faststartrepeatcount
Default Setting
3
Command Mode
Global Config
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 442