Quanta Computer QuantaMesh User Manual page 808

UANTA COMPUTER INC.
6.11.2.20 neighbor maximum-prefix
This command is used to control how many prefixes can be received from a neighbor, use the neighbor
maximum-prefix command in Router BGP Config Mode.
Syntax
neighbor <peeripaddr> maximum-prefix {<maximum> | unlimited} [<threshold> | warning-only]
peeripaddr: IP address of the neighboring router.
maximum: Maximum number of prefixes allowed from this neighbor.
unlimited: Don't restric the number of prefixes from this neighbor.
threshold: Integer specifying at what percentage of maximum the router starts to generate a
warning message. The range is from 1 to 100.
warning-only: Allows the router to generate a log message when the maximum is exceeded,
instead of terminating the peering.
Default Setting
maximum: default is 8160
threshold: default is 75
Command Mode
Router BGP Config Mode
Layer 2/3/4 Managed Switch
QuantaMesh | Routing Commands 808