Quanta Computer QuantaMesh User Manual page 564

UANTA COMPUTER INC.
5.20.3.15 policy-map
This command establishes a new DiffServ policy. The <policyname> parameter is a case-sensitive
alphanumeric string from 1 to 31 characters uniquely identifying the policy. The type of policy is specific
to the inbound traffic direction as indicated by the in parameter.
Syntax
policy-map <policyname> [{in | out} ]
no policy-map <policyname>
no – this command is to delete this policy.
in|out - The direction value is either in or out
Command Mode
Global Config
5.20.3.16 policy-map rename
This command changes the name of a DiffServ policy. The <policyname> is the name of an existing
DiffServ class. The <newpolicyname> parameter is a case-sensitive alphanumeric string from 1 to 31
characters uniquely identifying the policy.
Syntax
policy-map rename <policyname> <newpolicyname>
<policyname> - Old Policy name.
<newpolicyname> - New policy name.
Command Mode
Global Config
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 564