Quanta Computer QuantaMesh User Manual page 163

UANTA COMPUTER INC.
5.2.10.2 Interface port-channel
This command configures a new port-channel (LAG) with the specified ID. Display the information of this
port-channel using the show interface port-channel <portchannel-id>.
Before including a port in a port-channel, set the port physical mode. See speed command.
i
Syntax
interface port-channel <portchannel-id>
no interface port-channel <portchannel-id>
<portchannel-id> - The port-channel interface number to be created. The range of the port-channel
ID is 1 to 64.
no - This command delete the specified port-channel.
Default Setting
None
Command Mode
Global Config
Command Usage
Max number of port-channels could be created by user are 64 and maximum number of members for
each port-channel are 8.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 163