Routing Policy Commands; Show Commands - Quanta Computer QuantaMesh User Manual

UANTA COMPUTER INC.

8.6 Routing Policy Commands

8.6.1 Show Commands

8.6.1.1 show ip6 prefix-list
This command displays configuration and status for a prefix list.
Syntax
show ipv6 prefix-list [detail | summary] listname [ipv6-prefix/prefix-length] [seq sequencenumber] [longer]
[first-match]
Default Setting
None
Command Mode
Privileged Exec
Parameter
detail | summary: (Optional) Displays detailed or summarized information about all prefix lists.
listname: (Optional) The name of a specific prefix list.
ipv6-prefix/prefixlength: (Optional) The network number and length (in bits) of the network mask.
seq: (Optional) Applies the sequence number to the prefix list entry.
sequence-number: (Optional) The sequence number of the prefix list entry.
longer: (Optional) Displays all entries of a prefix list that are more specific than the given
network/length.
first-match: (Optional) Displays the entry of a prefix list that matches the given network/length.
Layer 2/3/4 Managed Switch
QuantaMesh | IPv6 Commands 981