Quanta Computer QuantaMesh User Manual page 216

UANTA COMPUTER INC.
5.3.4.4 sshc exec-timeout
This command sets the outbound ssh session timeout value in minute.
Changing the timeout value for active sessions does not become effective until the session
i
is reaccessed. Any keystroke will also activate the new timeout duration.
Syntax
sshc exec-timeout <1-160>
no sshc exec-timeout
<1-160> - max connect time (Range: 1 -160).
no - This command sets the remote connection session timeout value, in minutes, to the default.
Default Setting
5
Command Mode
Global Config
5.3.4.5 show sshc
This command displays the current outbound sshc settings.
Syntax
show sshc
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Message
Outbound SSH Login Timeout (in minutes) Indicates the number of minutes an outbound ssh
session is allowed to remain inactive before being logged off. A value of 0, which is the default,
results in no timeout.
Maximum Number of Outbound SSH Sessions Indicates the number of simultaneous outbound
ssh connections allowed.
Allow New Outbound SSH Sessions Indicates whether outbound ssh sessions will be allowed.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 216