Quanta Computer QuantaMesh User Manual page 147

UANTA COMPUTER INC.
5.2.8.10 clear mld snooping
The user can go to the CLI Privilege Exec to clear MLD Snooping entries from the MFDB table, use the
clear mld snooping priviledge configuration command.
Syntax
clear mld snooping
Default Setting
None
Command Mode
Privilege Exec
5.2.8.11 ipv6 mld snooping interfacemode
The user can go to the CLI Global/Interface Configuration Mode to set MLD Snooping on one interface
or all interfaces, use the ipv6 mld snooping interfacemode to enable MLD snooping on
global/interface. Use the no ipv6 mld snooping interfacemode to disable MLD Snooping on global/
interfaces.
Syntax
ipv6 mld snooping interfacemode [<all>]
no ipv6 mld snooping interfacemode [<all>]
Default Setting
Disabled
Command Mode
Global Config
Interface Config
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 147