Quanta Computer QuantaMesh User Manual page 448

UANTA COMPUTER INC.
VTP Pruning Mode: Displays whether pruning is enabled or disabled.
VTP V2 Mode: Displays if VTP version 2 mode is enabled. By default, all VTP version 2 switches
operate in version 1 mode.
MD5 digest: Displays the checksum values for the VTP domain status.
Configuration last modified: Displays the time stamp of the last configuration modification and the
IP address of the switch that caused the configuration change to the database.
Local updater ID: Displays the Local updater ID for the VTP domain status.
5.13.1.4 show vtp trunkport
This command displays the VTP trunkport status.
Syntax
show vtp trunkport
Default Setting
None
Command Mode
Privileged Exec
Display Message
Port: Displays the interface number.
Trunkport: Displays the trukport status (enable or disable) on the interface number.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 448