Quanta Computer QuantaMesh User Manual page 124

UANTA COMPUTER INC.
5.2.6.16 ip igmp snooping router-alert-check
The user can go to the CLI Global Configuration Mode to set IGMP Snooping router-alert-check admin
mode on the system, use the ip igmpsnooping router-alert-check global configuration command. Use
the no ip igmp snooping router-alert-check disable IGMP Snooping router-alert-check admin mode.
Syntax
ip igmp snooping router-alert-check
no ip igmp snooping router-alert-check
Default Setting
Disabled
Command Mode
Global Config
5.2.6.17 show ip igmp snooping
The user can go to the CLI Privilege Exec to get all of igmp snooping information, use the show ip igmp
snooping Privilege command.
Syntax
show ip igmp snooping [interface <slot/port> | vlan <vlan-id> | port-channel <portchannel-id>]
<slot/port> - Interface number.
<vlan-id> - VLAN ID (Range: 1 – 4093).
<portchannel-id> - Port-channel interface number. The range of port-channel ID is 1 to 64.
Default Setting
None
Command Mode
Privilege Exec
Display Message
When the optional arguments <slot/port>, <portchannel-id> or <vlan-id> are not used, the command
displays the following information.
Admin Mode: Indicates whether or not IGMP Snooping is active on the switch.
Interfaces Enabled for IGMP Snooping: Interfaces on which IGMP Snooping is enabled.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 124