Quanta Computer QuantaMesh User Manual page 380

UANTA COMPUTER INC.
This command is used to configure the TACACS+ authentication and encryption key.
Syntax
key [<key-string> | encrypted <key-string>]
Note that the length of the secret key is up to 128 characters.
< key-string > - The valid value of the key.
encrypted - the key string is encrypted.
Default Setting
None
Command Mode
TACACS Host Config
This command is used to configure the TACACS+ authentication host port.
Syntax
port [<port-number>]
<port-number> - The valid port number. Range (0 – 65535)>
Default Setting
49
Command Mode
TACACS Host Config
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 380