Quanta Computer QuantaMesh User Manual page 768

UANTA COMPUTER INC.
Default Setting
None
Command Mode
Route Map Config
Parameter
as-path-list-number: An integer from 1 to 500 identifying the AS path access list to use as match
criteria.
6.10.2.6 match community
To configure a route map to match based on a BGP community list, use the match community
command in Route Map Configuration mode. If the community list returns a permit action, the route is
considered a match. If the match statement refers to a community list that is not configured, no routes
are considered to match the statement.
To delete a match term from a route map, use the no form of this command. The command no match
community list exact-match removes the match statement from the route map. (It does not simply
remove the exact-match option.) The command no match community removes the match term and all its
community lists.
Syntax
match community <community-list> [community-list...] [exact-match]
no match community <community-list> [community-list...] [exact-match]
Default Setting
None
Command Mode
Route Map Config
Parameter
community-list: The name of a standard community list. Up to eight names may be included in a
single match term.
exact-match: (Optional) When this option is given, a route is only considered a match if the set of
communities on the route is an exact match for the set of communities in one of the statements in the
community list.
6.10.2.7 match ip address
To configure a route map to match based on a destination prefix, use the match ip address command
in Route Map Configuration mode. If you specify multiple prefix lists in one statement, then a match
occurs if a prefix matches any one of the prefix lists. If you configure a match ip address statement within
a route map section that already has a match ip address statement, the new prefix lists are added to the
existing set of prefix lists, and a match occurs if any prefix list in the combined set matches the prefix.
To delete a match statement from a route map, use the no form of this command.
Layer 2/3/4 Managed Switch
QuantaMesh | Routing Commands 768