Quanta Computer QuantaMesh User Manual page 693

UANTA COMPUTER INC.
6.3.1.15 show ip ospf virtual-link brief
This command displays the OSPF Virtual Interface information for all areas in the system.
Syntax
show ip ospf virtual-link brief
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Messages
Area ID: The area id of the requested OSPF area.
Neighbor: The neighbor interface of the OSPF virtual interface.
Hello Interval: The configured hello interval for the OSPF virtual interface.
Dead Interval: The configured dead interval for the OSPF virtual interface.
Retransmit Interval: The configured retransmit interval for the OSPF virtual interface.
Transit Delay: The configured transit delay for the OSPF virtual interface.
6.3.1.16 show ip ospf lsa-group
This command displays the number of self-originated LSAs within each LSA group.
Syntax
show ip ospf lsa-group
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Messages
Total self-originated LSAs: The number of LSAs originated from self.
Average LSAs per group: The average number of LSAs per group.
Layer 2/3/4 Managed Switch
QuantaMesh | Routing Commands 693