Quanta Computer QuantaMesh User Manual page 85

UANTA COMPUTER INC.
5.2.3.6 show protocol group
This command displays the Protocol-based VLAN information for either the entire system, or for the
indicated group.
Syntax
show protocol group [<group-name>]
<group-name> - The group name of an entry in the Protocol-based VLAN table.
no parameter – Displays the entire table.
Default Setting
None
Command Mode
Privileged Exec
Display Message
Group Name: This field displays the group name of an entry in the Protocol-based VLAN table.
Group ID: This field displays the group identifier of the protocol group.
Protocol(s): This field indicates the type of protocol(s) for this group.
VLAN: This field indicates the VLAN associated with this protocol group.
Interface(s): This field lists the slot/port interface(s) that are associated with this protocol group.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 85