Configuration Commands - Quanta Computer QuantaMesh User Manual

UANTA COMPUTER INC.

6.9.2 Configuration Commands

6.9.2.1 ip vrrp
This command enables the administrative mode of VRRP in the router.
Syntax
ip vrrp
no ip vrrp
Default Setting
Disabled
Command Mode
Global Config
This command sets the virtual router ID on an interface for Virtual Router configuration in the router.
Syntax
ip vrrp <1-255>
no ip vrrp <1-255>
<1-255> - The range of virtual router ID is 1 to 255.
<no> - This command removes all VRRP configuration details of the virtual router configured on a
specific interface.
Default Setting
None
Command Mode
Interface Config
Layer 2/3/4 Managed Switch
QuantaMesh | Routing Commands 755