Quanta Computer QuantaMesh User Manual page 462

UANTA COMPUTER INC.
5.16.1.3 clear eventlog
This command is used to clear the event log, which contains error messages from the system.
Syntax
clear eventlog
Default Setting
None
Command Mode
Privileged Exec
5.16.1.4 clear logging buffered
This command is used to clear the message log maintained by the switch. The message log contains
system trace information.
Syntax
clear logging buffered
Default Setting
None
Command Mode
Privileged Exec
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 462