Storm Control - Quanta Computer QuantaMesh User Manual

UANTA COMPUTER INC.

5.2.11 Storm Control

5.2.11.1 show storm-control
This command is used to display broadcast storm control information.
Syntax
show storm-control broadcast
Default Setting
None
Command Mode
Privileged Exec
Display Message
Intf: Displays interface number.
Mode: Displays status of storm control broadcast.
Rate: Displays rate in pps (packet per second) for storm control broadcast.
Action: Shutdown or send trap when storm is detected.
This command is used to display multicast storm control information.
Syntax
show storm-control multicast
Default Setting
None
Command Mode
Privileged Exec
Display Message
Intf: Displays interface number.
Mode: Displays status of storm control multicast.
Rate: Displays rate in pps (packet per second) for storm control multicast.
Action: Shutdown or send trap when storm is detected.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 176