Ets Traffic-Class-Group Weight - Quanta Computer QuantaMesh User Manual

UANTA COMPUTER INC.

9.3.7 ets traffic-class-group weight

Use the ets traffic-class-group weight command to specify the weight for each interface Traffic Class
Group.
Syntax
ets traffic-class-group weight < wp-0> <wp-1> <wp-2>
<wp-0>: The number of weight for queue 0.
<wp-1>: The number of weight for queue 1.
<wp-2>: The number of weight for queue 2.
Default Setting
None
Command Mode
Data-Center-Bridging Interface Mode
QuantaMesh | Data Center Bridging Commands
Layer 2/3/4 Managed Switch
997