Calendar Set; Reload - Quanta Computer QuantaMesh User Manual

UANTA COMPUTER INC.

5.16.10 calendar set

This command is used to set the system clock.
Syntax
calendar set <mm/dd/yyy> <hh:mm:ss>
<mm/dd/yyyy> - Date Time <mm/dd/yyyy> format. (Month <1-12>. Day <1-31>. Year <2000-2037>
<hh:mm:ss> - hh in 24-hour format (Range: 0 - 23), mm (Range: 0 - 59), ss (Range: 0 - 59)
Default Setting
None
Command Mode
Privileged Exec

5.16.11 reload

This command resets the switch without powering it off. Reset means that all network connections are
terminated and the boot code executes. The switch uses the stored configuration to initialize the switch.
You are prompted to confirm that the reset should proceed. A successful reset is indicated by the LEDs
on the switch.
Syntax
reload [<warm>]
<warm> - To only restart the operation software without rebooting whole system.
Default Setting
None
Command Mode
Privileged Exec
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 487