Quanta Computer QuantaMesh User Manual page 753

UANTA COMPUTER INC.
6.9.1.4 show ip vrrp interface stats
This command displays the statistical information about each virtual router configured on the switch.
Syntax
show ip vrrp interface stats {<slot/port> | vlan <vlan-id>} [<vrid>]
<slot/port> - Valid slot and port number separated by forward slashes.
<vrid> - Virtual router ID.
<vlan-id> - VLAN ID. The range of VLAN ID is 1 to 4093.
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Message
VRID: Represents the router ID of the virtual router.
Uptime: Is the time that the virtual router has been up, in days, hours, minutes and seconds.
Protocol: Represents the protocol configured on the interface.
State Transitioned to Master: Represents the total number of times virtual router state has
changed to MASTER.
Advertisement Received: Represents the total number of VRRP advertisements received by this
virtual router.
Advertisement Interval Errors: Represents the total number of VRRP advertisements received for
which advertisement interval is different than the configured value for this virtual
router.
Authentication Failure: Represents the total number of VRRP packets received that don't pass the
authentication check.
IP TTL errors: Represents the total number of VRRP packets received by the virtual router with IP
TTL (time to live) not equal to 255.
Zero Priority Packets Received: Represents the total number of VRRP packets received by virtual
router with a priority of '0'.
Zero Priority Packets Sent: Represents the total number of VRRP packets sent by the virtual router
with a priority of '0'
Invalid Type Packets Received: Represents the total number of VRRP packets received by the
virtual router with invalid 'type' field.
Address List Errors: Represents the total number of VRRP packets received for which address list
does not match the locally configured list for the virtual router.
Layer 2/3/4 Managed Switch
QuantaMesh | Routing Commands 753