Quanta Computer QuantaMesh User Manual page 603

UANTA COMPUTER INC.
5.23.1.5 show queue random-detect
This command displays the global WRED settings for each CoS queue. If you specify the slot/port, the
command displays the WRED settings for each CoS queue on the specified interface.
Syntax
show queue cos-queue {<slot/port> | port-channel <portchannel-id>}
< slot/port > The interface number.
<portchannel-id> - The port-channel interface number. The range of port-channel ID is 1 to 64.
Default Setting
None
Command Mode
Privileged Exec
Display Message
Queue Id: An interface supports n queues numbered 0 to (n-1). The specific n value is platform
dependent.
WRED Minimum Threshold: The configured minimum threshold the queue depth (as a percentage)
where WRED starts marking and dropping traffic.
WRED Maximum Threshold: The configured maximum threshold is the queue depth (as a
percentage) above which WRED marks/drops all traffic.
WRED Drop Probability: The configured percentage probability that WRED will mark/drop a
packet, when the queue depth is at maximum threshold. (The drop probability increases linearly from
0 just before the minimum threshold, to this value at the maximum threshold, then goes to 100% for
larger queue depths.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 603