Quanta Computer QuantaMesh User Manual page 851

UANTA COMPUTER INC.
Syntax
show ip mcast mroute group <groupipaddr> {detail |summary}
< groupipaddr > - the IP Address of the destination of the multicast packet.
detail - Display the multicast routing table details.
summary - Display the multicast routing table summary.
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Message
If the detail parameter is specified the follow fields are displayed:
Source IP: This field displays the IP address of the multicast data source.
Group IP: This field displays the IP address of the destination of the multicast packet.
Expiry Time (secs): This field displays the time of expiry of this entry in seconds.
Up Time (secs): This field displays the time elapsed since the entry was created in seconds.
RPF Neighbor: This field displays the IP address of the RPF neighbor.
Flags: This field displays the flags associated with this entry.
If the summary parameter is specified the follow fields are displayed:
Source IP: This field displays the IP address of the multicast data source.
Group IP: This field displays the IP address of the destination of the multicast packet.
Protocol This field displays the multicast routing protocol by which this entry was created.
Incoming Interface: This field displays the interface on which the packet for this group arrives.
Outgoing Interface List: This field displays the list of outgoing interfaces on which this packet is
forwarded.
Layer 2/3/4 Managed Switch
QuantaMesh | IP Multicast Commands 851