Quanta Computer QuantaMesh User Manual page 465

UANTA COMPUTER INC.
5.16.1.9 clear cdp
This command is used to clear the CDP neighbors information and the CDP packet counters.
Syntax
clear cdp [traffic]
traffic - this command is used to clear the CDP packet counters.
Default Setting
None
Command Mode
Privileged Exec
5.16.1.10 clear vlan
This command resets VLAN configuration parameters to the factory defaults.
Syntax
clear vlan
Default Setting
None
Command Mode
Privileged Exec
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 465