Quanta Computer QuantaMesh User Manual page 571

UANTA COMPUTER INC.
5.20.5.4 show diffserv service brief
This command displays all interfaces in the system to which a DiffServ policy has been attached. The
direction parameter is optional; if specified, only services in the indicated direction are shown.
Syntax
show diffserv service brief [ in | out ]
Default Setting
None
Command Mode
Privileged Exec
Display Message
DiffServ Admin Mode: The current setting of the DiffServ administrative mode. An attached policy
is only active on an interface while DiffServ is in an enabled mode.
The following information is repeated for interface and direction (only those
interfaces configured with an attached policy are shown):
Interface: The slot number and port number of the interface (slot/port).
Direction: The traffic direction of this interface service.
OperStatus: The current operational status of this DiffServ service interface.
Policy Name: The name of the policy attached to the interface in the indicated direction.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 571