Quanta Computer QuantaMesh User Manual page 559

UANTA COMPUTER INC.
5.20.3.8 class
This command creates an instance of a class definition within the specified policy for the purpose of
defining treatment of the traffic class through subsequent policy attribute statements.
Syntax
class <classname>
<classname> is the name of an existing DiffServ class. Note that this command causes the
specified policy to create a reference to the class definition.
Command Mode
Policy-Class-Map Config
5.20.3.9 no class
This command deletes the instance of a particular class and its defined treatment from the specified
policy.
Syntax
no class <classname>
<classname> is the name of an existing DiffServ class. Note that this command removes the
reference to the class definition for the specified policy.
Command Mode
Policy-Class-Map Config
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 559