Configure; Disconnect - Quanta Computer QuantaMesh User Manual

UANTA COMPUTER INC.

5.16.12 configure

This command is used to activate global configuration mode.
Syntax
configure
Default Setting
None
Command Mode
Privileged Exec

5.16.13 disconnect

This command is used to close a telnet session.
Syntax
disconnect {<0-58> | all}
<0-58> - telnet session ID.
all - all telnet sessions.
Default Setting
None
Command Mode
Privileged Exec
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 488