Quanta Computer QuantaMesh User Manual page 833

UANTA COMPUTER INC.
7.2.1.5 show ip igmp interface stats
This command displays the IGMP statistical information for the given interface. The statistics are only
displayed when the interface is enabled for IGMP.
Syntax
show ip igmp interface stats {<slot/port> | vlan <vlan-id>}
<slot/port> - Valid slot and port number separated by forward slashes.
<vlan-id> - VLAN ID. The range of VLAN ID is 1 to 4093.
Default Setting
None
Command Mode
Privileged Exec
User EXEC
Display Message
Querier Status: This field indicates the status of the IGMP router, whether it is running in Querier
mode or Non-Querier mode.
Querier IP Address: This field displays the IP Address of the IGMP Querier on the IP subnet to
which this interface is attached.
Querier Up Time: This field indicates the time since the interface Querier was last changed.
Querier Expiry Time: This field displays the amount of time remaining before the Other Querier
Present Timer expires. If the local system is the querier, the value of this object is
zero.
Wrong Version Queries: This field indicates the number of queries received whose IGMP version
does not match the IGMP version of the interface.
Number of Joins: This field displays the number of times a group membership has been added on
this interface.
Number of Groups: This field indicates the current number of membership entries for this interface.
Layer 2/3/4 Managed Switch
QuantaMesh | IP Multicast Commands 833