Quanta Computer QuantaMesh User Manual page 908

UANTA COMPUTER INC.
8.3.1.4 show ipv6 ndp
This command displays NDP cache information for the management port.
Syntax
show ipv6 ndp
Default Setting
None
Command Mode
Privilege Exec
Display Message
IPv6 Address: The IPv6 address of the interface.
MAC Address: The MAC Address used.
isRtr: Specifies the router flag.
Neighbor State: The state of the neighbor cache entry. Possible values are: Reachable, Delay.
Age Updated: The time in seconds that has elapsed since an entry was added to the cache.
Layer 2/3/4 Managed Switch
QuantaMesh | IPv6 Commands 908