Configuration Commands - Quanta Computer QuantaMesh User Manual

UANTA COMPUTER INC.

6.1.2 Configuration Commands

6.1.2.1 arp
This command creates an ARP entry. The value for <ipaddress> is the IP address of a device on a
subnet attached to an existing routing interface. The value for <macaddress> is a unicast MAC address
for that device.
Syntax
arp <ipaddr> <macaddr>
no arp <ipaddr> <macaddr>
<ipaddr> - Is the IP address of a device on a subnet attached to an existing routing interface.
<macaddr> - Is a MAC address for that device. The format is 6 two-digit hexadecimal numbers that
are separated by colons, for example, 00:06:29:32:81:40.
no - This command deletes an ARP entry.
Default Setting
None
Command Mode
Global Config
6.1.2.2 arp cachesize
This command configures the maximum number of entries in the ARP cache.
Syntax
arp cachesize <767-4096>
no arp cachesize
<767-3968> - The range of cache size is 767 to 4096.
no - This command configures the default ARP cache size.
Default Setting
The default cache size is 4096.
Command Mode
Global Config
Layer 2/3/4 Managed Switch
QuantaMesh | Routing Commands 648