Quanta Computer QuantaMesh User Manual page 460

UANTA COMPUTER INC.
5.15.2.3 macfilter addsrc all
This command adds all interfaces to the source filter set for the MAC filter with the MAC address of
<macaddr> and <vlan-id>. You must specify the <macaddr> parameter as a 6-byte hexadecimal number
in the format of b1:b2:b3:b4:b5:b6. The <vlan-id> parameter must identify a valid VLAN.
Syntax
macfilter addsrc all <macaddr> <vlan-id>
no macfilter addsrc all <macaddr> <vlan-id>
<macaddr> - Specified a 6-byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6.
<vlan-id> - VLAN ID. The range of VLAN ID is 1 to 4093.
no - This command removes all interfaces to the source filter set for the MAC filter with the MAC
address of <macaddr> and VLAN of <vlan-id>.
Default Setting
None
Command Mode
Global Config
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 460