Quanta Computer QuantaMesh User Manual page 620

UANTA COMPUTER INC.
5.26.1.2 show dns
This command displays the configuration of the DNS server.
Syntax
show dns
Default Setting
None
Command Mode
Privileged Exec
Display Message
Domain Lookup Status: Enable or disable the IP Domain Naming System (DNS)-based host
name-to-address translation function.
Domain Relay Status: Enable or disable the IP Domain Naming System (DNS)-based host
name-to-address relay function.
Default Domain Name: The default domain name that will be used for querying the IP address of a
host.
DNS Client Source Interface: The interface to use as the source interface.
DNS Client Source IPv4 Address: The IPv4 address used for the DNS client to send packets.
DNS Client Source IPv6 Address: The IPv6 address used for the DNS client to send packets.
Domain Name List: A list of domain names that will be used for querying the IP address of a host.
Name Server List: A list of domain name servers, including IPv4 and IPv6.
Request: Number of the DNS query packets been sent.
Response: Number of the DNS response packets been received.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 620