Quanta Computer QuantaMesh User Manual page 455

UANTA COMPUTER INC.
5.14.1.2 show interface switchport protected
This command displays the status of the interface (protected/unprotected) under the groupid.
Syntax
show interface switchport protected <slot/port> <groupid>
Default Setting
None
Command Mode
Privileged Exec
Display Message
Name: An name of the protected port group.
Protected: Indicates whether the interface is protected or not. It shows TRUE or FALSE. If the group
is a multiple groups then it shows TRUE in Group <groupid>.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 455