Quanta Computer QuantaMesh User Manual page 104

UANTA COMPUTER INC.
5.2.4.2 switchport dvlan-tunnel/ dot1q-tunnel
This command is used to enable Double VLAN Tunneling on the specified interface.
Syntax
switchport {dvlan-tunnel | dot1q-tunnel}
no switchport {dvlan-tunnel | dot1q-tunnel}
Default Setting
Disable
Command Mode
Interface Config
5.2.4.3 switchport dvlan-tunnel/ dot1q-tunnel ethertype
This command configures the ether-type for specific interface. The ether-type may have the values of
802.1Q, vMAN, or custom. If the ether-type has a value of custom, the optional value of the custom ether
type must be set to a value from 0 to 65535.
Syntax
switchport {dvlan-tunnel | dot1q-tunnel } [ethertype {802.1Q | custom <0-65535> | vman}]
no switchport {dvlan-tunnel | dot1q-tunnel} [ethertype]
Default Setting
802.1Q
Command Mode
Interface Config
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 104