Quanta Computer QuantaMesh User Manual page 1004

UANTA COMPUTER INC.
9.5.1.3 show vmtracer vm
The command displays VMs interfaces (Vnics) that are accessible to the switch interfaces where the VM
Tracer interface mode is enabled.
Syntax
show vmtracer vm [detail <vm_name>]
<vm_name> - displays information for the specific VM.
Default Setting
None
Command Mode
Privileged Exec
Display Message
VM Name: the name of attached VM.
VM Adapter: the adapter name of the VM interface.
Interface: the associated switch interface of attached VM.
VLAN: the VLAN value of the VM interface.
Vnic: the adapter name of the VM interface.
Mac: the network mac address of vnic.
Portgroup: the portgroup of the VM.
Vlan: the vlan value of the VM interface.
Switch: the vSwitch of the VM.
Host: the host of the VM.
QuantaMesh | Data Center Bridging Commands
Layer 2/3/4 Managed Switch
1004